کمپرسورهای دور متغیر اینورتردار با موتور مغناطیس دائم سری PM آتروتک
توان کاری: 22 تا 75 کیلووات
هوادهی: 0.8 تا 13.3 متر مکعب بر دقیقه
فشار کاری: 7/8/10 بار
مزایای کمپرسورهای دور متغیر اینورتردار با موتور مغناطیس دائم سری PM آتروتک
1 Down-to-earth investment for the future
Innovative Air end and PM motor combined means efficient transmission.
Efficiency & IP65 protection grade.
2 What you pay should be only for what you use
Innovative Air end and PM motor combined means efficient transmission.
IE4 efficiency & IP65 protection grade.
Bearing free PM motor means no maintenance required.
Motor winding protected by epoxy resin, means no risk of short circuit.
3 Special Dual Housing Oil Cooling Motor
Innovative closed loop oil cooled motor.
Special coolant and independent fan.
4
Motor rotor is directly mounted on the rotor shaft.
Motor with no gears or belts, no shaft seal, no coupling.
Zero transmission loss.
Easy installation and dismantling.
No adjustment/ alignment required.
Reduced maintenance cost.
5 Double Frequency conversion system
Double Frequency conversion system.
Constant pressure output.
Significant energy-saving.
Match to demand pressure and flow rate.
Constant temperature output.
قطعات تشکیل دهنده کمپرسور
معرفی قطعات
① Permanent Magnet (PM) motor
● Exceed IE4 standards
● Oil-cooled motor
● variable speed drive
● IP65 protection
② New compressor airend
● New improved rotor profile
● R&D in Japan
● designed for 10 years* of reliable operation
③ Inlet filter
● Nano scale Heavy duty
● filtration accuracy upto 99.9%
● Dust particles below 0.3 micron
● Pressure drop indicator
④ Cooling fan
● VSD control
● Compact
● Low noise level
● High capacity for optimized cooling
● Low power consumption
⑤ Classic cooler design
● Separate oil/air cooler
● Easy access for maintenance
● Paint anti-corrosion coating on surface
● Over size cooler design
⑥ Innovative vectorial inverter
● CE, UL, CUL, ROHS certification
● Meet EMC c3 and C2 requirements
● Independent cooling air duct design
● Robust enclosure for trouble-free operation in the harshest conditions.
⑦ Plot® Touch controller
● 7.0 inch full color touch LCD screen
● Real-time Operation/ Maintenance/ Alarm information
● Operation record/ Chart display
● Weekly timer/Service history and planning
⑧ Inlet valve
● Optimizes the inlet flow of the air end.
● No blow-off losses / Large suction area
● Full aluminum design: maintenance-free.
● Fast check: prevent unloading and shutdown oil injection
⑨ Oil filter
● Filter the dirts in the lubricated oil reliably
● Oil particles can be controlled at 0.1 micron
● Ensure the smooth and well-lubricating oil system
⑩ Oil gas tank & Built-in separation system
● Oversized air and oil tank improves the cyclone effect maximising the seperation process
● The high efficiency oil seperator ensures that the oil carry over is less than 3ppm.
● System pressure loss:less than 0.02Mpa
⑪ Electrical control cabinet
● Siemens core electrical components are used to further enhance reliabity.
⑫ all-steel internal pipe system
● All steel internal pipe work is used to prevent leakage and premature ageing often seen with flexible pipes
● Less pipe pressure loss
مشخصات محصولات
توجه:
مقادیر ارائه شده بر اساس ISO1217 (فشار هوای 1 بار(a)، دمای 20 درجه سانتی گراد و رطوبت 0 درصد) میباشد.
برق ورودی دستگاههای فوق 380V/50HZ/3P بوده و سایر مقادیر نیز در صورت درخواست مشتریان قابل ارائه می باشد.
بالاترین ظرفیت قابل دریافت در محدوده 60% تا 100% میباشد.
برای شرایط کاری خاص مانند مناطق مرتفع تر از سطح دریا، محیط های بسیار گرم، رطوبت بالا، محیط های با آلودگی زیاد و یا هرگونه محیط با شرایط غیر متعارف بایستی کمپرسورهای طراحی شده برای شرایط خاص مربوط به آن سفارش گردد.
حق هرگونه تغییر در طراحی و مشخصات دستگاهها و بهسازی سیستم ها بدون اطلاع قبلی برای این شرکت محفوظ میباشد.